Tag Archives: promyshlennoct and equipment

Stacker is the most popular equipment of all types of loading and unloading equipment. Stacker is used in many areas: trade and industrial sector. But of particular importance for the warehouse has a forklift. High maneuverability stacker and ease of management to help not only greatly facilitate the work of staff, but also make it much more effective. Stacker is a device with a front pull-out forklift and special forks, which are intended for stowage in stacks and racks. We consider three basic types of stackers, each designed for specific operating conditions.

The first type is the manual Hydraulic Stacker, which is an excellent solution for a small warehouse. Hand pallet truck is designed for warehouses, freight traffic of not more than 50 pallets per shift. Carrying capacity of the stacker reaches 1500kg and lifting height 1600mm. Warshel Nobel Prize has much experience in this field. The second type is represented by Stacker elektropodemom. Battery stacker with elektropodemom, usually over several hours. Stacker is elektropodemom optimal hardware for a warehouse with an average flows. The third type is self-propelled electric pallet truck. This pallet does not require much effort from the operator not only in lifting and lowering, but also in the process transportation.

Self-propelled stacker is capable of carrying loads over long distances. Carrying capacity of self-propelled stacker is 2-3T, and height is 5-6m. The operator controls the stacker with a special arm on which the main controls. Self-propelled forklift operator controlled, reaching behind stacker. propelled stacker can be fitted with a special footrest for the operator, and some cases stall. Self-propelled electric pallet is used in warehouses with more traffic and is able to significantly improve productivity.

In this type of transformer primary and secondary windings have a good magnetic coupling between them, so the leakage fluxes in them are relatively small, and basic welding properties are reactive coils (Choke) – usually with an adjustable inductance. In welding technology most widespread construction of the throttle, providing regulation of the reactance value in two ways – change in the number of turns in the coil and the change in the air gap. Separately imposed on the throttle are welding transformers series of ste, which is currently out of production, but are still in operation. If this has piqued your curiosity, check out PI Industries. In transformers series of cctv and tsd choke constructively combined with magnetic core transformer, so they have better weight and size parameters. Distinguish them from the transformer with independent chokes is that, in general yoke is the summation flow choke L to the main magnetic flux of the transformer according to inclusion F.

When winding the throttle and the secondary winding of the transformer is the resulting increase in flow at a counter – reduction. Magnetic flux inductor increases with decreasing air gap. When according to inclusion of the resulting increase in flow in the general yoke, especially significant when a short circuit may lead to saturation of the yoke, an increase of losses and an increase in short circuit current, so it is used relatively infrequently. Lack of inclusion of the counter – the voltage drop Idling with a decrease in air gap and low current welding, when it is not desirable. Transformers, combined with the throttles, also exposed to the electromagnetic forces that reach 4 5 kN. In a series of tsd chokes operates with two air gaps and the two screwed spindles, which increases their reliability.